![background image](http://html1.mh-extra.com/html/audiovox/jensen-vm8022/jensen-vm8022_installation-and-operation-manual_3013923009.webp)
VM8022
5
OPERATION
Power
Press the (power) button
(2) to turn the unit on.
Press and hold
the power
button
again to turn the unit off.
NOTE: LCD panels may take longer to respond when subjected to cold
temperatures for an extended period of time. In addition, the visibility
of the numbers on the LCD may decrease slightly. The LCD display
will return to normal when the temperature becomes normal.
Source
Press the
SRC
button (6) to select a different mode of operation, as
indicated on the display panel. Available modes include tuner (FM1, FM2,
FM3, AM1, AM2), DVD, SD, USB, and auxiliary (AUX).
Audio Mute
Press the
MUTE
button (21) to silence the audio volume. “
” appears on
the display. Press
MUTE
again to restore volume to the previous setting.
Volume Control
To increase the volume, turn the rotary encoder (5) clockwise. To decrease
the volume, turn the rotary encoder counter-clockwise. When volume is
adjusted, the volume level will be shown on the display panel as a number
ranging from “0” (lowest) to “63” (highest).
Audio Menu
Press the
VOL
button (5) to access the audio menu. Press the
VOL
button
repeatedly to move through the list of menu options.
•
BASS: Turn the rotary encoder (5) to adjust the bass level from “+7” to
“-7”.
•
TREBLE: Turn the rotary encoder to adjust the treble level from “+7” to
“-7”.
•
BALANCE: Turn the rotary encoder to adjust the balance from “R7” (full
right) to “L7” (full left).
•
FADER: Turn the rotary encoder to adjust the fader from “F7” (full front)
to “R7” (full rear).
The unit automatically exits the audio control menu after five seconds of
inactivity.
Menu Operation
Press and hold
the
VOL
button (5) for more than two seconds to access the
menu. Press the
VOL
button to move through the following menu options:
EQ MODE, BEEP, 12/24 MODE (clock), VOL MODE, A-VOL,
SUBWOOFER, SUB VOL. The following procedures assume you have
already accessed the menu.
Equalizer Selector (EQ MODE)
The equalizer function applies preset sound effects to the unit’s audio
output signal. Turn the rotary encoder to select from the following equalizer
options: “OFF”, “ROCK”, “POP”, “CLASSIC” and “FLAT”. With the equalizer
function activated, if bass or treble is adjusted, the EQ Mode will revert to
OFF.
VOL
VM8022
VOL
LO/DX
LOUD
3
4
RDM
2
INT
1
5
6
SD/MMC
AS
/
RPT
20
21
23
22
18
Содержание Jensen VM8022
Страница 1: ...160 Watts Peak Watts en Cr te Vatios el M ximo 40W x 4 VM8022 Installation and Operation Manual...
Страница 2: ......
Страница 4: ...ii VM8022...
Страница 22: ...VM8022 18...