22
Installation
Fig. 1:
Pin configuration of the System Connector 1 and 2
System Connector 1
1.
Highlevel loudspeaker input rear left (-) / C
2.
Highlevel loudspeaker input front left (-) / A
3.
Highlevel loudspeaker input front right (-) / B
4.
Highlevel loudspeaker input rear right (-) / D
5.
Loudspeaker output rear right (-) / D
6.
Loudspeaker output rear left (-) / C
7.
Loudspeaker output front right (-) / B
8.
Loudspeaker output front left (-) / A
9.
Ground* / Warning: Do not use this pin!
10.
Ground* / Warning: Do not use this pin!
11.
Highlevel loudspeaker input rear left (+) / C
12.
Highlevel loudspeaker input front left (+) / A
13.
Highlevel loudspeaker input front right (+) / B
14.
Highlevel loudspeaker input rear right (+) / D
15.
Loudspeaker output rear right (+) / D
16.
Loudspeaker output rear left (+) / C
17.
Loudspeaker output front right (+) / B
18.
Loudspeaker output front left (+) / A
19.
+12 Volts* / Warning: Do not use this pin!
20.
+12 Volts* / Warning: Do not use this pin!
System Connector 2
21.
Not used
22.
Subwoofer output 1 (-) / E
23.
Subwoofer output 1 (-) / F
24.
Loudspeaker output center (-) / G
25.
Not used
26.
Subwoofer output 1 (+) / E
27.
Subwoofer output 1 (+) / F
28.
Loudspeaker output center (+) / G
Fig. 2:
Pin assignment Power Input plug
Plug top side
A
+12 V - for connecting the UP 7DSP to the positive
terminal of the car´s battery.
B
GND - for connecting the ground cable.
C
REM - remote input for connecting the amplifier to the
remote output of the signal source.
10
9
21 22 23 24
25 26 27 28
1 2 3 4
11 12 13 14
5 6 7 8
15 16 17 18 19 20
* Not used on the enclosed System Connector 1 connection cable.
