30
1
System Connector
Connector for the MATCH cable harness.
Make sure that you only use a MATCH origi-
nal connection cable to connect the amplifier
to the car radio.
2
Auto Remote
This switch allows to activate / deactivate the
automatic turn-on feature of the amplifier.
3
Remote In / Out
The remote input can be used to switch on
the M 5.4DSP. The remote output has to be
used to switch on external amplifiers that
are connected to the
Line Output F - I
of the
amplifier.
4
Subwoofer Output
Connector for a passive subwoofer or speak-
er. Use only the enclosed subwoofer cable
for connection.
5
USB Input
Connects the M 5.4DSP to your PC.
6
Control pushbutton
Use this button to either switch between the
setups or initiate a reset of the device.
7
Status LED
The
Status LED
indicates the operating
mode of the amplifier and its DSP memory.
8
Line Output F - I
Line outputs for connecting external amplifi
-
ers. Make sure that the remote output (
Re-
mote Out
) is used to turn on these devices.
9
Optical Input
Optical input for digital stereo signals (SPDIF
format).
10
SCP (Smart Control Port)
Multifunction interface for e.g. an optional
remote control or other MATCH M 5.4DSP
accessory.
Connectors and control units
1
2
3
9
10
7
6
5
4
8
