Audionet SAM G2, Руководство пользователя

Страница: 15 / 36

15
6.3 Mains phase detection
The correct polarization of mains is important for reasons of audio clarity
and stability. Please connect the mains cord that the 'hot' pin of the wall
outlet is connected to the pin marked '
phase ' 11 of the mains input 9 on
the back panel. The SAM G2 recognizes the incorrect polarization of the
mains plug automatically. Right after switching on the unit from stand-by
mode by pressing the
power
key on the front panel the following mes-
sage will appear in the display in case the mains polarization is incorrect:
► Attention: ◄
► Mains phase incorrect ◄
If you read the above message, switch off the unit by pressing the power
key. Please wait until the display no longer reads
Going to sleep...
.
Disconnect the SAM G2 from mains by operating the mains switch 10 .
Now pull the mains plug and re-insert it into the mains socket rotated by
180°.
If you switch on the unit again, the warning should not appear now.
Important
·
If the SAM G2 issues the mains polarization warning or no warning
at all for both positions of the mains plug, check the connection to
earth of your mains socket and mains cord.
You have to ensure a
stable connection to earth for the mains phase detection of the
SAM G2 to work correctly!
6.4 Using Audionet Link
The SAM G2 is equipped with an Audionet Link output Link OUT 12
allowing you to switch on/off further Audionet units (e.g. power amplifi-
ers, CD player or tuner) connected via Audionet Link (also see section
'
Audionet Link ' on page 13).
If the rest of your Audionet system is connected to your SAM G2 via
Audionet Link, all linked units will be automatically switched on/off as
soon as you switch on/off your SAM G2 using the
power
key on the
front panel or the Audionet System Remote Control Harmony One .
Note
·
Please read section ' Audionet Link ' on page 13. Also, consult the
user's manual of your Audionet components connected via Audionet
Link for further information.