Audionet SAM G2, Руководство пользователя

Страница: 13 / 36

13
5.6 Headphones socket
A 6.3 mm headphones socket is located at the rear of your SAM G2. The
signal at this socket can be switched on and off to allow the headphones
to be plugged in permanently. Switching is easily done on the front panel,
please refer to section '
Set Output Mode ' on page 20.
5.7 Audionet Link
For your convenience, the SAM G2 can switch on/off all other Audionet
units (e.g. power amplifiers) connected via Audionet Link by a simple
touch on the remote control or the
power key on the front panel.
You only need a simple optical 'Toslink' cable. Connect the Audionet
Link output
Link OUT 12 of your SAM G2 to the Audionet Link input
of the unit to be controlled.