28
If the input signal is a bitstream (like Dolby Digital or DTS), the current bitrate is
displayed as kbps (kbit per second) in the lower right corner of the display. In case of a
PCM input signal information about the usage of emphasis during recording is shown
instead of the bitrate:
EMPH
recorded using emphasis
–
no emphasis used.
After several seconds the display changes. Now the second line provides information
about the output and speaker configuration. If a speaker is available in the current
speaker configuration, and it is supported by the current Listening Mode, the
corresponding letter is printed in the display:
L
=
Left Front
C
=
Center
R
=
Right Front
LS
=
Left Surround
RS
=
Right Surround
BL
=
Back Left
BR
=
Back Right
BC
=
Back Center, if only one speaker is available in the channel group Back
If a speaker is used by the program material, the corresponding letter is printed inversely
in the display.
If the subwoofer is active, it is displayed by an inverse '
SUB
'. Otherwise this symbol is
not printed.
