25
The following additional conditions apply to the Bass Manager:
-
Channel group '
Front
' can not be set to '
None
'.
-
If '
Front
' is set to '
Small
' all other channel groups are forced to '
Small
' and the
Subwoofer is activated.
-
Only if channel group '
Surr
' is available (= not '
None
'), group '
Back
' can be
selected to any other than '
None
'.
-
If channel group '
Surr
' is switched to '
None
', group '
Back
' is forced to '
None
'
automatically.
-
Only if the Subwoofer is activated (set to '
available
'), any of the other channel
groups can be set to '
X-Bass
'.
-
If any channel group is set to '
X-Bass
', the Subwoofer cannot be deactivated.
Menu "Delay Manager"
Use this menu to enter the distances from your speakers to your listening position ('
Set
Distance
'). The distance ranges from 0 to 1500 cm in steps of 5cm. Alternatively,
you can enter the distance in Inches ('
Set Distance Unit
'). According to the
entered distances, the MAP calculates the necessary delays of each channel to ensure,
that all signals from all speakers arrive at the same time at the listening position.
Use keys
and
to enter the distance, select channel to be setup with keys
/
. The order of channels is the same as in the '
Level Setup
' menu.
Subw. Offset:
This option 'virtually' moves the subwoofer relative to the listening position (= adjusting
the 'phase' of the subwoofer). Use
positive
values, if you want to
delay
the signal from
the subwoofer relative to all other channels. Use
negative
values, if the signal from the
subwoofer should arrive
earlier
than the signals from all other speakers.
Set Distance Unit:
To choose the unit for measuring the distances of speakers, use
to select
'
Centimeter
' or
to select '
Inches
'. Distances already entered into the system
are converted to the latest selected unit.
