Audionet AMP VII, Руководство пользователя, Страница: 22 / 27

22
Tip
Pinning of the balanced (XLR) inputs:
The pins are marked with the same number as in the diagram above.
8.4 Set AutoStart
If the AutoStart function is active, the AMP VII starts up automatically to
normal operating mode right after the unit is connected to mains power
(e.g. by operating the mains switch on the bottom side). Use this option to
start up the AMP VII automatically using a timer device.
disabled
The AutoStart function is disabled. If you connect the
AMP VII to mains power, the unit will start up to stand-
by mode. To activate the AMP VII use the
power key on
the front panel or the Audionet Link interface.
active
The AutoStart function is active. As soon as the AMP VII
is connected to mains power, the unit starts up to normal
operating mode automatically. Use this setting to control
the AMP VII by a timer device.
Note
·
In order to use the AutoStart function with a timer device, the mains
switch on the bottom side has to be in position 'on' all the time. The
connection to mains is switched by the timer device in this case.
8.5 Set Off-Text
Select here how the AMP VII indicates the stand-by mode:
off
Stand-by mode is indicated by the text
off
.
dot
Stand-by mode is indicated by a small dot (pixel) in the dis-
play.
1: Ground
3: Negative
2: Positive