Audionet AMP VII, Руководство пользователя, Страница: 20 / 27

20
8.1 Set Dim Level
Select the brightness of the display on the front panel. Five steps are
available: 100%, 75%, 50%, 25% and OFF.
Important
·
Long-term usage of the display set to a maximum brightness (set-
ting 100%) may cause extended signs of wear resulting in a decay
of contrast or brightness of individual dots in the display. Do not
use the display with a brightness set higher than the factory de-
fault of 50% over a longer period of time!
Note
·
Is the brightness set to
Off
the display is only on during setup ad-
justmentes, powering up/down and while displaying an error mes-
sage. It switches off automatically several seconds after the last user
entry.
·
The AMP VII activates the 'display saver' automatically after 10
minutes without any user entry.
·
While the 'display saver' is active, the display shows, depending on
the selected display mode (
Set Display
), either
Active
or the
temperature of the AMP VII in the form of
Temp Cool/Ok/High
.
The display brightness is automatically reduced to 25% , and the lo-
cation of the information text changes randomly every 12 seconds to
prevent any 'burn-in' effect of the display.
·
The 'display saver' is de-activated, and the display retruns to its nor-
mal mode as soon as any user entry is detected.
·
The user cannot switch off the automatic 'display saver' function!
8.2 Set Display
Select the information the AMP VII displays while in normal operating
mode. There are two modes available:
Standard
The normal operating mode is indicated by:
Active
Multi-Channel In
Temperature
During normal operating mode the AMP VII shows its
working temperature in 3 steps:
Cool
the AMP VII is cool,
Ok
the AMP VII has its normal operating temperature,
High
the AMP VII is working at a higher tempera
ture under heavy load.