Audionet AMP VII, Руководство пользователя, Страница: 10 / 27

10
Important
·
Always use both mains connections.
·
The electrical specifications of your home country must meet the
electrical specifications printed onto the back panel.
·
The AMP VII is a Class I unit and must be earthed. Please ensure a
stable earth connection. Phase ('hot' pin) is marked '
phase ' ( 22 and
24 ) on the back panel for each mains input.
·
If you connect the mains cords please make sure that the mains
switch on the bottom of the unit (see section
'Frontpanel ' on page 7)
is switched off.
·
Never pull the mains plug(s) while the AMP VII is switched on! Be-
fore you pull the mains cord(s) off their sockets, power down the unit
to stand-by mode and switch off the mains switch on the bottom side.
Only in cases of extended absence (like vacations) or if massive trouble
on the mains power is to be expected you should switch off the AMP VII.
To disconnect the unit completely from mains pull both mains plugs.
Tipp
·
Using high-quality mains cords may improve the sound quality.
Please consult your local Audionet dealer.
4.3 Orientation of mains plug
The correct polarization of mains is important for reasons of audio clarity
and stability. Please connect the mains cord so that the hot pins of the
wall outlets are connected to the pin of the mains inputs 23 und 25
marked '
phase ' 22 and 24 .
Note
·
Your Audionet AMP VII is able to detect a wrong polarization of
both mains plugs during start-up. When you switch on the unit from
stand-by mode using the
power key on the front panel, the AMP VII
will issue the warning
Att.: Mainsphase
No.1 Incorrect!
if the mains plug to mains input mains1 23 has the wrong orienta-
tion and/or
Att.: Mainsphase
No.2 Incorrect!