AUDIOLINE TEL68, Руководство по эксплуатации

Страница: 50 / 72

- Operation -
50
4.7 Redial
If a connection that you have dialled is engaged or you were unable to get
through to anybody, simply replace the receiver. The last three numbers dialled
remain stored in the telephone automatically. To call one of the last three
numbers dialled, proceed as follows:
Select one of the last three numbers by repeatedly pressing the button.
Press the ENTER button. After the number has been dialled, the telephone switches
immediately to the handsfree facility. By lifting the receiver, the call can be continued
via the receiver.
You can also delete a particular number from the redial memory. Select the
required telephone number with the receiver on the hook by using the
button and press the
C button.
4.8 Automatic Redial
The automatic redial is a useful aid to make telephoning easier for you. If a
number is engaged, the number will be repeated automatically up to ten times.
Attempt to make a call to the required party.
If the line is engaged, press the
AUTO-
button. The display shows “BITTE
AUFLEGEN” and then “AUTO WAHL”. The LED next to the handsfree button flashes.
If you made the call using the handsfree facility, the call is ended automatically.
Now, after about 30 seconds your telephone will try to call the number again. The
handsfree facility is switched on and the number is dialled. If the number is still
engaged, the handsfree facility automatically switches itself off again after a short time
and your telephone waits for a further 30 seconds before another attempt is made.
If the call is answered, you can press button to carry out the call using the
handsfree facility. By lifting the receiver, the call can be continued via the receiver.
Note : By lifting and replacing the receiver once, the automatic redial is automatically
cancelled.