AudioControl Maestro M8, Руководство по пользовательскому опыту

Страница: 21 / 50

®
21
M
aestro
M8™
HDMI Signals
Your Maestro M8 is equipped with seven discrete HDMI inputs and dual
assignable HDMI outputs. All the HDMI outputs are assignable to various
display devices, the signals on both will be the same.
Output 1 - Connect this to the primary display device located in your main
theater - such as a projector or other primary display device.
Output 2 - Connect this to your secondary display device.
Audio Return Channel
Connect either of the 2 HDMI outputs to an HDMI 1.4 display device
ARC (Audio Return Channel) enabled input to receive the audio signals
from the sources connected directly to the display. The ARC source selec-
tion on your Maestro M8 is labeled Display. From the Display Input Menu
in the M8, set CEC Control to On for your chosen ouput and enable the
ARC Control to receive the audio from the display.
IR (Infra-red) Remote Control Connections
We have equipped the Maestro M8 with two Infrared (IR) inputs to allow
for maximum control flexibility with standard IR remote controls. This
allows you to place the infrared receiver where it can “see” the signal from
the remote control when the equipment may be hidden. The IR connec-
tions are designed for “modulated” signals and wired for stereo or mono
3.5mm jacks with “Tip” being the modulated signal and “Sleeve” being
ground.
Zone 1 IR - This is ideal for when the front panel of the Maestro M8 is
hidden away in some dark closet or equipment rack. To prevent the possi-
bility of receiving multiple commands, when you connect an IR receiver to
this input, it will disable the front panel IR receiver.
Zone 2 IR - Allows for control of source and volume functions of Zone 2
12V Trigger Connections
There are two stereo mini-jack 12 volt trigger outputs on the rear panel
of the Maestro M8 which are used to remotely control such things as the
power amplifier turn-on, projector power, screen automation. The jacks are
designed for 3.5mm mono connectors with “Tip” being the trigger output
and “Sleeve” being ground. Each jack is capable of outputting a 12V 70 mA
switching signal.
s
et
-u
p
& C
onfIguratIon