AudioControl Maestro M8, Руководство по пользовательскому опыту

Страница: 12 / 50

®
12
M
aestro
M8™
u MAIN POWER SWITCH - The only time to
turn OFF the Maestro M8 with this switch is when
the system will not be used for some time. Normally
this switch is left on. When this switch is turned off,
you cannot turn the Maestro M8 On or Off via any
other method.
v
VOLTAGE SELECTION - The Maestro M8 is
designed to operate with either 110-120V volt or 220-
240V line voltages. You will want to set this switch to
match up with your local power voltages.
w POWER CONNECTION - All good AC power
flows in here.
x
ZONE 2 VIDEO OUTPUT - This second zone
output enables viewing a source independently of the
main theater system.
y
DIGITAL AUDIO CONNECTIONS - The
Maestro M8 features assignable coaxial and opti-
cal digital audio inputs and outputs. While we have
labeled them with the names of typical source units,
these connections as assignable via the internal
menus.
Rear Panel Features
g
uIded
t
our of tHe
M
aestro
M8
z ANALOG AUDIO INPUTS - Connect the
appropriate analog two channel stereo outputs and
inputs from your source units here.
{
ANTENNA CONNECTIONS - These inputs
should be connected to the AM and FM antennas
that are supplied with your Maestro M8. For op-
timum reception you may want to consider a roof
mounted external antenna.
| CONTROL PORT - Use this connection to con-
trol the Maestro M8 with an automation system.
} NETWORKED AND USB AUDIO INPUTS -
Your Maestro M8 has the ability to accept audio files
via an Ethernet connection or from a USB mass stor-
age device.
~
12 VOLT TRIGGER OUTPUTS - These three
outputs provide a +12 volt signal to control the
power amplifiers, source units, video projector, screens
and curtains in the theater. The Main Trigger output
is active whenever the Maestro M8 is turned on; the
Video Trigger 2 is active whenever a video source is
selected.
u w
z ~ { y
v
x | }