AudioControl Maestro M8, Руководство по пользовательскому опыту

Страница: 23 / 50

®
23
n
avIgatIng tHe
s
et
-u
p
M
enus
If at any point you need
to reset the video output
resolution and frame rate to
the default setting, push and
hold the “Select” button for 3
seconds.
M
aestro
M8™
Initial Display Configurations
Your Maestro M8 is set to “Preferred” in the Video Output settings menu.
This allows the M8’s output resolution to be defined by the display’s capa-
bilities in regards to it’s pixel count and frequency output. You can change
this setting to a fixed Output Resolution or you can Bypass the resolution
setting in order to bypass the scaler used by the Maestro M8. You do this
by way of the Video Output settings menu.
Please note, any Component
or Composite source will be upscaled to the display’s native resolution if
Bypass has been selected.
Configurations For 1080p/24 Applications
The Maestro M8 supports both 1080p/24 fps (frames per second) and
the more commonly used 1080p/60 fps video formats. To properly utilize
the 1080p/24 format you will want to make sure that the source device
(i.e. Blu-ray player) and the display device (i.e. projector or TV) are both
capable of supporting this format. In the Video Output section of the Setup
menus, set the Output Resolution of your Maestro M8 to 1080p (not Pre-
ferred) and make sure that the Frame Rate is set to follow input. Failure to
do any of the above could result in no image.
Navigating
Navigating the Set-Up Menus is a very simple process that can be done
using the appropriate front panel controls on your Maestro M8 or by using
the HTR-1 remote control that incorporates the appropriate IR codes.
1. Press the Menu button once to enter the Setup Menus. The word
“Menu” will appear on the display of your Maestro M8 and the actual
menu will appear on your display device.
2. Use the Input selection button “
Input
∧
” and “ Input
∨
” to navigate
among the menu’s and use the “
<
Info” and “Mode
>
” buttons to select
appropriate menu screen.
3. Press the “
SELECT ” button or “OK” to select the menu options.
4. Press the Menu button anytime to exit the Menu screens and any setting
changes will be saved automatically.