6
Complimentary Features
Features continued
•
DHCP:
An IP address is obtained
via DHCP by default. If a DHCP
server is not found on the network,
The Director M6400 and M6800 will
default to
192 .168 .0 .249 .
•
UPnP:
Device discovery is enabled on
The Director M6400 and M6800 for
ease of connectivity from a PC.
•
Numbering:
In the device discovery /
UPnP window, if you are using mul-
tiple Director amplifiers, you will find
that each Director is numbered in the
sequence they were added onto the
network.
•
Groups:
Grouping has been enabled
for quick control of zones through
Telnet commands. Up to 4 groups can
be defined for control over Standby
and Source Selection.
•
Import/Export:
Exporting and Im-
porting of the amplifier’s settings
– including EQ settings – has been
enabled. Now you can configure
your EQ settings as a template and
apply these to each Director M6400
or M6800 amplifier in your system.
A little refining of those settings for
each amp and you will be in and out
in no time.
• 16 channels of AudioControl
amplification
• Any zone can play any input source
• Efficient power amplifiers and power
supplies
• Power consumption is less than 2 Watts
in standby
• Rack mountable 2U form factor
• Removable rack ears
• Light weight
• Stackable with other Director or Archi-
tect Models
• Signal sense independent for each zone
• Input assignment independent for each
zone
• Super wonderful signal processing
allows for a wide variety of EQ options
and adjustments
• 12V Master trigger usable with contact
closure or 12V external source
• A and B digital inputs assignable to any
zone
• A and B digital outputs assignable from
any analog or digital input
• Analog RCA loop-through outputs
