background image

24

Control Via Telnet Commands

To control The Director M6400 or M6800 
in an automation network, you will need 
nerves of steel, and a controller that can 
send and receive telnet commands and 
responses.
The command and response structures 
of the controls provided via telnet are 
in simple human language. 

Power on

 is 

simply “power1” followed by a carriage 
return to end the command. Command 
feedback is confirmed by an echo of 
the command, followed by a carriage 
return, then another statement of “01” 
followed by the command string, then a 
carriage return and a line feed to end the 
response string. If there is a value-change 
like volume up, then the confirmation 
response will include the new value at the 
end of the string. 

Telnet Session Length

Sending a command to the The Director 
opens a telnet session – nothing tricky, 
just send it a command and it will respond. 
The session will remain open for 4 hours, 
and then close. If another command is 
received within that 4 hours, then the 
clock restarts. The session will close 4 
hours from the time of the last command 
received. If your automation system treats 
such activity as dropping off the network, 
then pinging it in the early AM every day is 
probably a good practice.  

Control Command Examples:
Increment volume by 1, in Zone 3, where 
volume before the command is 51:

 

Command: Z3vol+<CR> 
Response:  Z3vol+<CR> 
 

   01Z3vol52<CR><LF>

To turn on main power: 

Command: power1<CR> 
Response:  power1<CR>
 

       01power1<CR><LF>

To mute or turn Zone 5 off: 
Command: Z5off<CR> 
Response:  Z5off<CR> 
 

        01Z5off<CR><LF>

Note: 

The query ZONEON? returns a descrip-
tion of the on state of all the zones, 
where each zone is separated by a space. 
1 equals on, and 0 equals off. So if zones 
6 and 7 are on and all the other zones are 
off the information will be displayed like: 
0 0 0 0 0 1 1 0 0 0. Also note that the last 
two values in position 9 and 10 are reflect-
ing the state of the digital outputs. The re-
sponse to the query ZONEOFF? will return 
the opposite values if zones 6 and 7 are off 
as it is confirming that the zones are off so 
that value is positive: 1 1 1 1 1 0 0 1 1 1.
Please visit our delightful website for 
further information and a splendid table of  
control commands:
www.audiocontrol.com/
home-audio/network-amplifiers/
the-director-model-m6400
(As things in the fast-paced world of 
technical documentation are constantly 
changing, visiting our website is one way 
to make sure you have the latest informa-
tion.)

Control via Telnet Commands

Содержание DIRECTOR M6400

















































Отзывы: