AudioCodes mediapack MP-500, Руководство пользователя

Страница: 243 / 574

Version 5.8 243 October 2009
SIP User's Manual 3. Web-Based Management
6. In the 'Load an ini File' page, you can now choose to either:
•
Click Browse , navigate to the ini file, and then click Send File ; the ini file is
loaded to the device and you're notified as to a successful loading.
•
Use the ini file currently used by the device, by not selecting an ini file and by
ensuring that the 'Use existing configuration' check box is marked (default).
•
Return the device's configuration settings to factory defaults, by not selecting an
ini file and by clearing the 'Use existing configuration' check box.
7. You can now choose to either:
•
Click Reset ; the device resets, utilizing the new cmp and ini file you loaded up to
now as well as utilizing the other auxiliary files.
•
Click Back ; the 'Load a cmp file' page is opened again.
•
Click Next ; the next page opens for loading the data routing configuration and
next consecutive auxiliary file listed in the Wizard.
8. For loading the auxiliary files, follow the same procedure as for loading the ini file (Step
6).
9. In the 'FINISH' page, complete the upgrade process by clicking Reset; the device
'burns' the newly loaded files to flash memory and then resets the device. After the
device resets, the 'End Process' screen appears displaying the burned configuration
files (refer to the figure below).
Figure 3-190: End Process Wizard Page
10. Click End Process to close the wizard; the 'Enter Network Password' dialog box
appears.
11. Enter your login user name and password, and then click OK ; a message box appears
informing you of the new cmp file.
12. Click OK ; the Web interface becomes active, reflecting the upgraded device.