AudioCodes mediapack MP-500, Руководство пользователя

Страница: 135 / 574

Version 5.8 135 October 2009
SIP User's Manual 3. Web-Based Management
3. To change the user name of an account, perform the following:
a. In the field 'User Name', enter the new user name (maximum of 19 case-sensitive
characters).
b. Click Change User Name ; if you are currently logged into the Web interface with
this account, the 'Enter Network Password' dialog box appears, requesting you to
enter the new user name.
4. To change the password of an account, perform the following:
a. In the field 'Current Password', enter the current password.
b. In the fields 'New Password' and 'Confirm New Password', enter the new
password (maximum of 19 case-sensitive characters).
c. Click Change Password ; if you are currently logged into the Web interface with
this account, the 'Enter Network Password' dialog box appears, requesting you to
enter the new password.
Notes:
•
For security, it's recommended that you change the default user name
and password.
•
A Web user with access level 'Security Administrator' can change all
attributes of all the Web user accounts. Web users with an access level
other than 'Security Administrator' can only change their own password
and user name.
•
To reset the two Web user accounts' user names and passwords to
default, set the
ini file parameter ResetWebPassword to 1.
•
To access the Web interface with a different account, click the Log off
button located on the toolbar, click any button or page item, and then re-
access the Web interface with a different user name and password.
•
You can set the entire Web interface to read-only (regardless of Web
user account's access level), by using the
ini file parameter
DisableWebConfig (refer to ''Web and Telnet Parameters'' on page 300 ).
•
Access to the Web interface can be disabled, by setting the ini file
parameter DisableWebTask to 1. By default, access is enabled.
•
You can define additional Web user accounts using a RADIUS server
(refer to the
Product Reference Manual ).
•
For secured HTTP connection (HTTPS), refer to the Product Reference
Manual .
3.4.4.2 Configuring the Web and Telnet Access List
The 'Web & Telnet Access List' page is used to define up to ten IP addresses that are
permitted to access the device's Web and Telnet interfaces. Access from an undefined IP
address is denied. If no IP addresses are defined, this security feature is inactive and the
device can be accessed from any IP address.
The Web and Telnet Access List can also be defined using the ini file parameter
WebAccessList_x (refer to ''Web and Telnet Parameters'' on page 300 ).