AudioCodes Media Pack MP-124, Руководство пользователя

Страница: 557 / 584

Version 6.6 557 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
Parameter Description
FORMAT TrunkGroup_Index =
TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId,
TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel,
TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId,
TrunkGroup_LastTrunkId, TrunkGroup_Module;
[\TrunkGroup ]
For example:
The configuration below assigns channels 1 through 4 to
Hunt Group 1 and assigns phone numbers 101 to Channel
1, 102 to Channel 2, and so on:
TrunkGroup 0 = 1, 255, 1, 4, 101, 0, 255, 255;
Note: For a description of this table, see Configuring
Endpoint Phone Numbers on page 203 .
Hunt Group Settings
Web: Hunt Group Settings
EMS: SIP Routing > Hunt Group
[TrunkGroupSettings]
This table parameter configures the rules for channel
allocation per Hunt Group. The format of this parameter is as
follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroup,
TrunkGroupSettings_MWIInterrogationType,
TrunkGroupSettings_TrunkGroupName;
[\TrunkGroupSettings]
For example:
TrunkGroupSettings 0 = 1, 0, 5, branch-hq, user, 1, 255, ;
TrunkGroupSettings 1 = 2, 1, 0, localname, user1, 2, 255, ;
Note: For a description of this table, see 'Configuring Hunt
Group Settings' on page 204 .
Web: Channel Select Mode
EMS: Channel Selection Mode
[ChannelSelectMode]
Defines the method for allocating incoming IP-to-Tel calls to
a channel (port) for all Hunt Groups.

[0] By Dest Phone Number (default)

[1] Cyclic Ascending

[2] Ascending

[3] Cyclic Descending

[4] Descending

[5] Dest Cyclic Ascending.

[6] By Source Phone Number

[9] Ring to Hunt Group

[11] Dest Ascending
Notes:

For a detailed description of the parameter's options, see
'Configuring Hunt Group Settings' on page
204 .

Channel select mode per Hunt Group can be configured
in the Hunt Group Settings (see 'Configuring Hunt Group
Settings' on page
204 ).