Audio Technica ATND1061DAN, Руководство пользователя

Страница: 7 / 88

6
Installation precautions
This product should be installed by a professional contractor. When determining the installation location and
method, be sure to consider the applicable laws and ordinances for the area where the product is being installed.
Audio-Technica assumes no responsibility in the event of accidents such as the product dropping due to insufficient
strength of the installation site or improper installation.
When working in an elevated location, be sure to choose a stable location with no loose items on the ground before
working.
Install the product in a location where there is no risk of the product being hit or damaged by the movements of
nearby people or equipment.
Be sure to verify the strength of the installation location. The installation location should generally be able to handle
at least 10 times the weight of the product.
Depending on the structure of the ceiling, vibrations may cause noise to be generated. Appropriate separate
damping measures are recommended.
Be sure to use only the included accessories for installation.
Do not use the included accessories for any purpose other than for use with this product.
Do not install the product in areas with exposure to high levels of oil or smoke, or where solvents or solutions are
volatilized. Such conditions may result in chemical reactions that lead to deterioration or damage of the product’s
plastic parts, which may cause an accident such as the product dropping from the ceiling.
Do not install the product in areas where damage from salt or corrosive gas may occur. Such damage may reduce
the strength of the product and cause an accident such as the product dropping from the ceiling.
Be sure to tighten the screws properly and completely. Failing to do so may result in injury due to an accident such as
the product dropping from the ceiling.
Do not pinch the cables during installation.
Securely attach the seismic cable, zip tie, and safety belt in the specified location.
Attach the seismic cable so that there is as little slack as possible.
If the impact from a fall is applied to the seismic cable, replace the cable with a new one.