Audio Technica ATND1061DAN, Руководство пользователя

Страница: 13 / 88

Part names and functions
12
2 Power save mode / cancel button
Used to turn the power save mode on/off and for canceling preset settings.
3 Mute/confirm button
Used to turn All Mute on/off and for finalizing preset settings.
4 Preset mode button
Used to change preset settings.
5 Battery cover
Includes a lithium coin battery (for confirming initial operation).
Remove the protective film on the battery before use.
Only the specified model (CR2025) of lithium coin battery can be used. When replacing the battery, turn the remote
control over and remove the battery cover. Then, insert the battery into the battery cover with the plus (+) side
facing upwards.
How to change presets
Presets can be changed using the IR remote controller.
Settings in presets 1 to 4 will be recalled. For details on presets, see "Presets" (p. 65).
1
Press the preset mode button.
The indicator lamp on the microphone will flash in cyan.
2
Press and hold the preset mode button (for 3 seconds) before releasing.
The indicator lamp on the microphone will flash in red.
3
Press the preset mode button to select a preset.
The selected preset will change each time the preset mode button is pressed.
The color of the microphone’s indicator lamp will change and flash depending on the number of the selected
preset.
Preset 1: Red
Preset 2: Green
Preset 3: Blue
Preset 4: Yellow
Changes can be canceled by either pressing the power save mode / cancel button or not pressing any other
buttons for a few seconds.
4
Finalize the preset selection by pressing the mute/confirm button.