Audio Authority SF-16M, Руководство по установке

Страница: 8 / 36

8
BEFORE YOU BEGIN
• Confirm that nothing is missing from your shipping carton. Refer to Carton Contents on page 5.
• Record the serial number (
see rear panel ) in the space provided on the back cover of
this manual.
• Activate your warranty and get firmware update notifications: www.audioauthority.com/register.
• Read this instruction manual to become familiar with the configurations and functions of
this product.
audioauthority.com/adx_tips
audioauthority.com/sonaflex_tips
ADX TIPS
• VIDEOS
• FAQ
• TUTORIALS
SONAFLEX
• VIDEOS
• FAQ
• TUTORIALS
Rack Mounting
The SF-16M is designed so that it may be installed either on a
shelf or in a standard 19-inch equipment rack. If rack mounting,
remove the feet and the cover screws adjacent to the front panel
of the unit. Reuse the cover screws to mount the rack adapters
supplied with the SF-16M. Be sure to place a spacer under the
adapters at every screw location. Secure the SF-16M to the rails
of the equipment rack with the screws supplied. Use appropriate
chassis supports, such as Middle Atlantic CSA Series, especially
when transporting a loaded rack.
Essential Steps
1. Choose a control method
• If you plan to use the front panel for control, continue
to step 2 below.
• If you are using a third party controller skip to page 12.
2. Plan the system ( see worksheet, page 33 )
• List all of your audio sources
• Divide the house or building into Zones ( see page 11 )
• Decide how many speakers each Zone requires
• Choose stereo pairs and/or mono speaker locations
3. Basic setup (front panel - see page 17 )
• Set stereo and mono inputs and outputs
• Add outputs to Zones ( see page 19 )
• Enter source and Zone names
4. Connect sources and speakers ( see page 9, 11 )
5. Set up advanced features ( see page 22 )
• Groups, Sound Scenes, and Overrides
• Triggers and contact closures
• FlexPort Transmitters
Carton Contents
• SF-16M Amplifier
• Power Cord
• Rack ears (
see below )
• Ferrite beads (
see page 15
)
• DB-25 ( see page 9 )
• Phoenix Connectors (x 8) Pre Pack pn:903-154
• User manual
Other Materials You May Need
• Cables: Ethernet, serial, RCA, and speaker
• Infrared receiver
• Third party programmable remote control
• USB 1.1 or USB 2.0 compliant drive (FAT 32)
• PC for advanced setup (Mac or Windows)
Spacer
Figure 1.