Audio Authority SF-16M, Руководство по установке

Страница: 10 / 36

10
Single FlexPort Module Connection For One Stereo or Dual Mono Input
When connecting a single FlexPort audio module to a FlexPort bus input ( See Figure 7 below ) it is necessary to configure
the audio modules as shown below.
FlexPort Cat 5 Audio Inputs
The SF-16M includes two FlexPort Cat 5 inputs that accept a variety of pro and consumer
audio sources via optional FlexPort audio modules. See Appendix A for a detailed
overview of all FlexPort modules and system configuration .
FlexPort module options include:
FPM-B Balanced line/mic with phantom power
FPM-X XLR/ 1/4” TRS with phantom power
FPM-D Digital optical/coax
FPM-U Analog RCA
1 2
3 4 5 6 7 8 9 10 11 12 13 14
15 16
ETHERNET
USB
RS-232 IN
RS-232 OUT
LINK
SPEED
MAIN IR
IN
MAIN IR
OUT
UNIT ID
DB25 AUDIO INPUT
CONTACT CLOSURE 5V - 24V AC / DC
AUDIO LOOP OUTPUT
LINE INPUTS
OUT
IN
1 2
IN OUT
SYSTEM
TRIGGER
AUDIO
OVERRIDE
Set voltage selector
and install correct
fuses according to
local power supply.
Régler le sélecteur
de tension et
installer les fusibles
corrects selon
l’alimentation locale.
4002715
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
L
R
ETL LISTED CONFORMS
TO UL STD 60065
CERTIFIED TO CAN/CSA
STD C22.2 NO. 60065
Audio Authority® Corp. • 2048 Mercer Rd. Lexington, KY 40511 USA
800-322-8346 • 859-233-4599 • www.audioauthority.com
Model SF-16M 16-Channel
Digital Matrix Amplifier
VOLTAGE SELECTOR
OUT
IN
CAUTION: Do not connect Ethernet to FlexPort
100-120V~ 50-60 Hz 1125W
Replace Fuses Only
with T 10A, 250V
Remplacer Uniquement avec
Fusible T 10A, 250V
TECH TIPS
FPM-U
FPM-D
FPM-B
FPM-U
FPM-B
IN
OUT
IN
OUT
IN
OUT
FPM-D and FPM-U: These are natively stereo
input modules - Dipswitch setting should
be “Stereo”.
FPM-B and FPM-X: These are natively mono input
modules - If one mono source input is desired on both
FlexPort bus audio channels, the dipswitch setting
should be set to “Dual M” for dual mono.
FPM-D
SF-16M FlexPorts
Understanding the FlexPort Audio Bus
Each SF-16M FlexPort input supports:
• Two channels of audio - input can be either stereo or two mono channels (allows two mono inputs per FlexPort
bus)
• RS-485 data pathway - provides 2-way communication between the SF-16M and all connected FlexPort modules
• 18V power - provides power for two FlexPort modules on a single bus
Daisy Chain FlexPort Modules For Two Mono Inputs Per Bus
All FlexPort audio modules feature a FlexPort Bus In and Out, so any two modules may be daisy chained together for
a two mono source setup. In daisy chain configurations, it is required to assign one module as “Mono 1” and the other
module as “Mono 2” using the dipswitches located on the back of the FlexPort modules. See Appendix A for more
information . Figure 6 below illustrates a daisy chain configuration.
SF-16M
SF-16M
BUS
IN
BUS
OUT
ASSIGN
CHANNEL
STEREO
MONO 1
MONO 2
INPUT
MIX
OVER-
RIDE
BUS
PWR
FLEXPORT
761-392
MIC
ON
ON
MOMENTARY
TERM. ON
PHANT. OFF
LINE
OFF
OFF
TOGL.
OFF
ON
SWITCH
GAIN
MIN
MAX
BUS
IN
BUS
OUT
ASSIGN
CHANNEL
DUAL M
MONO 1
MONO 2
INPUT
MIX
OVER-
RIDE
BUS
PWR
FLEXPORT
761-392
MIC
ON
ON
MOMENTARY
TERM. ON
PHANT. OFF
LINE
OFF
OFF
TOGL.
OFF
ON
SWITCH
GAIN
MIN
MAX
BUS
IN
BUS
OUT
ASSIGN
CHANNEL
DUAL M
MONO 1
MONO 2
INPUT
MIX
OVER-
RIDE
BUS
PWR
FLEXPORT
761-392
MIC
ON
ON
MOMENTARY
TERM. ON
PHANT. OFF
LINE
OFF
OFF
TOGL.
OFF
ON
SWITCH
GAIN
MIN
MAX
BUS
IN
BUS
OUT
ASSIGN
CHANNEL
DUAL M
MONO 1
MONO 2
INPUT
MIX
OVER-
RIDE
BUS
PWR
FLEXPORT
761-392
MIC
ON
ON
MOMENTARY
TERM. ON
PHANT. OFF
LINE
OFF
OFF
TOGL.
OFF
ON
SWITCH
GAIN
MIN
MAX
Figure 6.
Figure 7.
Figure 5.