Audio Authority SF-16M, Руководство по установке

Страница: 27 / 36

27
BUS
IN
BUS
OUT
ASSIGN
CHANNEL
STEREO
MONO 1
MONO 2
MIX
OVER-
RIDE
BUS
FLEXPORT
761-391
ON
ON
MOMENTARY
TERM. ON
OFF
OFF
TOGL.
OFF
SWITCH
GAIN
MIN
MAX
BUS
IN
BUS
OUT
ASSIGN
CHANNEL
DUAL M
MONO 1
MONO 2
INPUT
MIX
OVER-
RIDE
BUS
PWR
FLEXPORT
761-392
MIC
ON
ON
MOMENTARY
TERM. ON
PHANT. OFF
LINE
OFF
OFF
TOGL.
OFF
ON
SWITCH
GAIN
MIN
MAX
Appendix B: Firmware Update Procedure
The latest version of firmware is available from our website on the SF-16M product page.
Learn more: www.audioauthority.com/sonaflex_tips.
1. Copy the latest firmware file onto a USB drive.
2. Insert the drive in the USB port on the rear panel of the SF-16M.
3. Press the menu key and navigate to the firmware update menu item.
4. Follow the prompts and select the firmware file.
5. After a short delay the SF-16M reboots and performs the firmware update.
6. Once the update has finished, the SF-16M reboots and resumes operation with the new firmware version.
Appendix C: Changing the Power Fuse
Before changing the fuse, find and correct
the excessive impedance load or wiring
short that caused the fuse failure.
• Remove the power cord.
• Carefully remove the fuse cover using a
flat blade screwdriver.
• Inspect both fuses to determine which one
is blown.
• Slide out spare fuse compartment as
shown and remove a spare fuse.
• Replace the blown fuse with a spare fuse,
or a fuse of the same value.
• Orient the fuse cover so that the arrow
points toward the correct voltage for your
region as shown to the right.
FlexPort Module “Override” Button
The purpose of the front panel override button is to switch designated SF-16M outputs to a FPM
input. Learn more: www.audioauthority.com/sonaflex_tips. A typical example is an audio mixer,
connected to a FPM-X in a conference room. When the override button is pressed, designated
outputs switch over to the audio mixer for the duration of the override. When the override button
is pressed again, all affected outputs will switch back to the input source prior to override. Audio
override is based on two key settings:
1. FPM dipswitch settings, previously configured
above.
2. SF-16M audio override settings, programmed
using the SF-16M PC Setup Utility
(see the online video Override tutorial).
Audio Override with “Mix” Option Enabled
In some cases it may be desired to mix two FPM
module inputs together upon audio override. An
example would be a classroom where both a
microphone and an audio presentation need to
be heard simultaneously. To acheive this function,
first daisy chain two FPM modules and wire back
to the SF-16M. Set one FPM as “Mono 1”, and
set the other as “Mono 2”. Both FPM’s must have
the “Mix” dipswitch set to On.
SF-16M
FlexPort
Input
Figure A-4.
Figure C-1.
audioauthority.com/adx_tips
audioauthority.com/sonaflex_tips
ADX TIPS
• VIDEOS
• FAQ
• TUTORIALS
SONAFLEX
• VIDEOS
• FAQ
• TUTORIALS
CAREFULLY PRY
WITH A SMALL
SCREWDRIVER
FUSE COVER
ARROW
INDICATES
VOLTAGE
200-240 Volts 100-120 Volts
SPARE
FUSE
ACTIVE
FUSES
1 2
3 4 5 6 7 8 9 10 11 12 13 14
15 16
ETHERNET
USB
RS-232 IN
RS-232 OUT
LINK
SPEED
MAIN IR
IN
MAIN IR
OUT
UNIT ID
DB25 AUDIO INPUT
CONTACT CLOSURE 5V - 24V AC / DC
AUDIO LOOP OUTPUT
LINE INPUTS
OUT IN
1 2
IN OUT
SYSTEM
TRIGGER
AUDIO
OVERRIDE
Set voltage selector
and install correct
fuses according to
local power supply.
Régler le sélecteur
de tension et
installer les fusibles
corrects selon
l’alimentation locale.
4002715
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
L
R
ETL LISTED CONFORMS
TO UL STD 60065
CERTIFIED TO CAN/CSA
STD C22.2 NO. 60065
Audio Authority® Corp. • 2048 Mercer Rd. Lexington, KY 40511 USA
800-322-8346 • 859-233-4599 • www.audioauthority.com
Model SF-16M 16-Channel
Digital Matrix Amplifier
VOLTAGE SELECTOR
OUT IN
CAUTION: Do not connect Ethernet to FlexPort
100-120V~ 50-60 Hz 1125W
Replace Fuses Only
with T 10A, 250V
Remplacer Uniquement avec
Fusible T 10A, 250V
TECH TIPS
UP
1 2
3 4 5 6 7 8 9 10 11 12 13 14
15 16
ETHERNET
USB
RS-232 IN
RS-232 OUT
LINK
SPEED
MAIN IR
IN
MAIN IR
OUT
UNIT ID
DB25 AUDIO INPUT
CONTACT CLOSURE 5V - 24V AC / DC
AUDIO LOOP OUTPUT
LINE INPUTS
OUT IN
1 2
IN OUT
SYSTEM
TRIGGER
AUDIO
OVERRIDE
Set voltage selector
and install correct
fuses according to
local power supply.
Régler le sélecteur
de tension et
installer les fusibles
corrects selon
l’alimentation locale.
4002715
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
L
R
ETL LISTED CONFORMS
TO UL STD 60065
CERTIFIED TO CAN/CSA
STD C22.2 NO. 60065
Audio Authority® Corp. • 2048 Mercer Rd. Lexington, KY 40511 USA
800-322-8346 • 859-233-4599 • www.audioauthority.com
Model SF-16M 16-Channel
Digital Matrix Amplifier
VOLTAGE SELECTOR
OUT IN
CAUTION: Do not connect Ethernet to FlexPort
100-120V~ 50-60 Hz 1125W
Replace Fuses Only
with T 10A, 250V
Remplacer Uniquement avec
Fusible T 10A, 250V
TECH TIPS
200V - 240V 100V - 120V
UP
200V - 240V 100V - 120V
SONAFLEX
DOWNLOAD
FIRMWARE
audioauthority.com/sonaflex_tips