Audio Authority SF-16M, Инструкция по установке и эксплуатации

Страница: 18 / 36

18 SF-16M Matrix Amplifier Installation and Operation Guide
Line 6: Treble boost (like bass boost but high shelf). Requires filter 2 to be a high
shelf.
Line 7:
Stereo/mono status. Any output can be mono or stereo.
Line 8: Balance; attenuates a single channel of a stereo pair.
Line 9-11: Maximum volume, maximum turn on volume, and minimum turn on
volume. Maximum volume sets the maximum level that the output can ever be
set to. Maximum and minimum turn on volumes take effect when the output
is powered off and then back on. If the volume is below the minimum turn on
volume, it is raised to the minimum volume; if above, it is turned down to the
the maximum.
Output Settings > Volume Levels
Shows live volume levels of all outputs on one screen, and shows input(s)
connected. Note: for stereo pairs, only the first member of the stereo pair is
selectable, but controls both outputs.
Note: The scale range on the input level detection is 500 mVRMS = 0 dB;
therefore an input signal of 500 mVRMS on an output set to 0 dB will have full
scale display.
Select a line to show a horizontal bar for volume level, the full name of the output,
and the full name of the input.
To set all outputs to a specific volume, select the last line and rotate the knob to
increase/decrease, then push the knob again to activate the new setting (volume
does not update in real time).
Output Settings > Assign Inputs
• Each line shows output, input channel number, and input name. Mono outputs
are individually selectable (inputs 1 and 2 are selectable, shown by an
underscore), whereas only the first output of a stereo pair can be selected, but
both switch together.
• Select an output and rotate the knob to switch the input on the fly.
• To set ALL outputs to a specific input, scroll to the bottom line. This adjustment
only activates after you push the knob.
Input Settings
There are two ways to make input adjustments: QUICK ACCESS, which allows
multiple adjustments to an individual input, and GAIN LEVELS, which allows gain
adjustment of all inputs on the same screen.
Input > Quick Access
Adjust input gain and stereo/mono settings for an individual input or stereo pair.
Line 1: Input channel number(s) and names. A mono input displays a single
channel (e.g., 7 Sirius), and stereo inputs display the channel-comma-channel
format (e.g., 7,8 CD Changer). Again, to select a stereo input, select the first
channel of the pair.
Line 2: Stereo or mono mode of the input. All inputs are natively mono, but when
an input is set to stereo, outputs connect as as left and right.
Line 3: Gain level, digital gain of -10 to 10 dB.
Line 4: The fourth line displays the live volume input level. This level is a dB
display from -20 to 0 dB; therefore any inputs that are below -20 dB will not
show on the meter.
Input > Gain Levels
All input channels are listed on the left and the meter displays input levels from
-20 to 0 dB. The last line allows all input gains to be set in one action.
LEFT (LEVELS) RIGHT
CHANNELS INPUT NAME
Input > Quick Access
Input > Input Gain
Output > Volume Levels
OUTPUT
NUMBER
LIVE
VOLUME
LEVEL
ASSIGNED
INPUT
Output > Assign Inputs
INPUT
CHANNEL(S)
OUTPUT
NUMBER
INPUT
NAME
Input > Input Gain