Audio Authority SF-16M, Инструкция по установке и эксплуатации, Страница: 34 / 36

34 SF-16M Matrix Amplifier Installation and Operation Guide
Mute
[U#SP##O##M#]
U1-4, SP1-10, O1-16, M0-2 (0 off, 1 on, 2 toggle)
Set the mute status of a single output or stereo pair in a scene preset.
Name Global
[SP##N”@”]
SP1-10, N (16 characters a-z, A-Z, 0-9, -.,/!?\)
Specify the name of the scene preset on all units.
Name
[U#SP##N”@”]
U1-4, SP1-10, N (16 characters a-z, A-Z, 0-9, -.,/!?\)
Specify the name of a scene preset on a per-unit basis.
Power
[U#SP##O##P#]
U1-4, SP1-10, O1-16, P0-2 (0 off, 1 on, 2 toggle)
Specify the power status of a single output or stereo pair in a scene preset.
Query
[U#SP##Q]
U1-4, SP1-10
Query a scene preset, which lists all members, their settings, and the name of the preset.
Remove
[U#SP##O##R]
U1-4, SP1-10, O1-16
Remove an output from a scene preset.
Remove All
[U#SPR]
U1-4
Remove all outputs from all scene presets.
Allow Remote Save (allow snapshot)
[SPRS#]
SPRS0-2 (0 off, 1 on, 2 toggle)
Turn on or off the ability to save scene presets (take a snapshot) remotely.
Remote Save (snapshot)
[SP##SAVE]
SP1-10
Snapshot: Save the current output levels, input levels, and mute status to the specified preset.
Remote Save (snapshot, one unit)
[U#SP##SAVE]
U1-4, SP1-10
Snapshot: Save the current output levels, input levels, and mute status to the preset in the specified unit.
Standby
Standby Global
[SBY#]
SBY0-2 (0 off, 1 on, 2 toggle)
Places all units in standby or releases them from standby. Turning on standby causes all outputs to be disabled, the DSP to stop running, and the screen to be turned off. Returning from standby turns on the DSP and the outputs.
Standby
[U#SBY#]
U1-4, SBY0-2 (0 off, 1 on, 2 toggle)
Places a unit in standby or releases it from standby.
Trigger
[U#TRIG#]
U1-4, TRIG0-2 (0 off, 1 on, 2 toggle)
Sets the way the system trigger input on the back panel functions. By default, the unit will auto-mute and power down the channel blocks in groups of 8 based on the detection of input signals. In addition to this power saving feature, the system trigger input can force the entire unit into standby or out of standby based on a voltage present on the system trigger input. Once the trigger mode is set to on, a high to low transition on the trigger input will place the unit into standby. Once in standby, a low to high transition will release the unit from standby.
State
Load
[U#LOAD]
U1-4
Load the system state from memory.
Reset
[U#RESET]
U1-4
Reset the state of the system to factory defaults.
Save
[U#SAVE]
U1-4
Save the system state to memory. There is an auto-save that saves the state 60 seconds after the last change.