Audio Authority SF-16M, Инструкция по установке и эксплуатации

Страница: 31 / 36

SF-16M Matrix Amplifier Installation and Operation Guide 31
Volume Max
[U#O##MV###]
U1-4, O1-16, MV-80-0 (dB)
Sets the maximum volume level of an output. Note that this setting also directly affects the nominal output volume, the current ‘live’ output volume, override levels, the maximum turn on volume, the minimum turn on volume, and scene preset volumes. If any of these contain a level that exceeds the maximum, they will be set to the maximum.
Volume Max Turn On
[U#O##MXTO###]
U1-4, O1-16, MXTO-80-0 (dB)
Sets the maximum turn on volume. After a power cycle or return from standby, the desired output volume will be checked against this, and any levels exceeding it will be set to the maximum.
Volume Min Turn On
[U#O##MNTO###]
U1-4, O1-16, MNTO-80-0 (dB)
Sets the minimum turn on volume. After a power cycle or return from standby, the desired output volume will be checked against this, and will be set to this level if they were lower.
Groups
Add
[U#G##O##A]
U1-4, G1-10, O1-16
Adds a single output or stereo pair to a group.
Mute
[U#G##M#]
U1-4, G1-10, M0-2 (0 off, 1 on, 2 toggle)
Sets the mute status of a group. Toggling mute status will result in all the members of the group being set to same mute status as the first member; if that member is muted, all will be unmuted, and vice versa.
Name
[U#G##N”@”]
U1-4,
G1-10,
N
(16
characters
a-z, A-Z, 0-9, -.,/!?\)
Names the specified group.
Power
[U#G##P#]
U1-4, G1-10, P0-2 (0 off, 1 on, 2 toggle)
Sets the power status of a group. Toggling power status will result in all the members of the group being set to the same power status as the first member; if that member is powered off, all will be powered on, and vice versa.
Query
[U#G##Q]
U1-4, G1-10
Query a group, which displays group members and group name.
Remove
[U#G##O##R]
U1-4, G1-10, O1-16
Removes a single output or stereo pair from a group.
Remove All
[U#GR]
U1-4
Clears the group membership of all groups.
Switch
[U#G##I##]
U1-4, G1-10, I1-20
Switch the outputs in the group to the specified input, based upon the mono/stereo status of the input(s) and output(s).
Volume
[U#G##V##]
U1-4, G1-10, V-80-0 (dB)
Sets the output volume of a group.
Volume Down
[U#G##VD]
U1-4, G1-10
Decrements the output volume of all members in the group from their current volume settings. It is possible to set different members of the group to different volume levels and retain the difference while turning them all down.
Volume Up
[U#G##VU]
U1-4, G1-10
Increments the output volume of all members in the group from their current volume setting. It is possible to set different members of the group to different volumes and retain the difference while turning them all up.
Basic DSP
Bass
[U#O##BASS##]
U1-4, O1-16, BASS-15-15 (dB)
Set the bass boost level of a single output or stereo pair. This requires that the output DSP filter 1 is a low shelf filter.
Bass Down
[U#O##BASSD]
U1-4, O1-16
Decrement the bass boost level of a single output or stereo pair. This requires that the output DSP filter 1 is a low shelf filter.
Bass Up
[U#O##BASSU]
U1-4, O1-16
Increment the bass boost level of a single output or stereo pair. This requires that the output DSP filter 1 is a low shelf filter.
Loudness
[U#O##LD#]
U1-4, O1-16, LD0-2 (0 off, 1 on, 2 toggle)
Turns on or off loudness for a single output or stereo pair. This requires that output DSP filter 3 is a low shelf and DSP filter 4 is a high shelf.
Treble
[U#O#TREB##]
U1-4, O1-16, TREB-15-15 (dB)
Set the treble boost level of a single output or stereo pair. This requires that the output DSP filter 2 is a high shelf filter.