Audient ASP2802 Скачать руководство пользователя страница 86

Страница: 86 / 113

Page -86-

Networking (Mac)

Moving across to ASP2802, power up the console
and once booted, press the

SETUP

button. The OLED

displays will show the first page of console setup.

First set the application you are using with ASP2802.
The options at the time of release include:

•  Apple Logic 9
•  Avid Pro Tools 8
•  Steinberg Cubase 5 (Nuendo)

Use the first rotary encoder to
select the required DAW application.

Note that once a change has been
made, the setup switch LED will flash
to indicate that a setting has changed.

If you exit setup by pressing the
switch once more and then return by
entering setup again, you will notice
that your setting has been automatically
saved.

Using the page keys, page to the right
and ensure that

Use DHCP

is set to

Page right again to reach the IP address
screen and set the IP address to

192.168.0.100

(default) using the encoders, then move to the
fourth page, and check that the subnet mask is
set to

255.255.255.0

Содержание ASP2802


















































































































Результаты поиска

Содержание ASP2802

Отзывы:

Audient ASP2802, Руководство по эксплуатации, Страница: 86 / 113

Результаты поиска

Содержание ASP2802

Отзывы: