Audient ASP2802, Руководство по эксплуатации

Страница: 65 / 113

Page -65- © Audient Ltd
Bus Compressor
Release Time
Specified in seconds (s) - this is the time taken for the
compressor sidechain to release from gain reduction
once the input signal has passed below the threshold.
Release times can be set to:
• 0.1 sec (100 ms)
• 0.3 sec (300 ms)
• 0.6 sec (600 ms)
• 1.2 sec
• 2.4 sec
• Auto Release
Typically faster release times are required when you want the
compressor to get out of the way “quickly” which can lead to
pumping and very obvious compression.
On vocal bus or piano, longer release times and auto release are
very useful. However if you want colourful compression on your
drum bus, faster release times are worth trying. Start at 0.1 sec
and work backwards until you get a suitably balanced effect.
Auto release utilises an adapative circuit that alters its release
time in a program dependent manner. It is fantastically smooth
and well suited to mix bus duty and also excels on vocal duties.
Gain Make-Up
With a range of 20 dB , the gain make-up control can be used to
restore program material level after compression, thus reducing
the dynamic range but preserving the overall output level.