Audient ASP2802, Руководство по эксплуатации

Страница: 31 / 113

Page -31- © Audient Ltd
Channel Strip
Active Insert Send & Parallel Processing Techniques
Please bear in mind that the insert send is always active
- the switch only engages the return path. Thus it is possible
to
“mult” signals from the insert send to set up parallel
compression or feed other external destinations in
parallel (a back-up recording system perhaps).
Try taking a feed from the insert send jack and returning
a processed version of the signal (such as a distorted or
heavily compressed version) into another channel line
input, or for simplicity the alternative input on each
channel (depending upon
DAW channel flip status this
could either be the line input or DAW input.
The diagram below illustrates how to connect such a path - in
this example the main channel path input is taken from the DAW
input (typical mixing scenario) by depressing the
DAW switch.
This leaves the line input free for the return path from your
outboard device - which can be returned to the mix bus via
the cue section alternative input and bus assign.