0
<t
0
N
,.....
N
......
0
,.....
Vl
CX)
-
spoken:
The reminder signal is spoken by the
system.
Reminder signal volume:
You can adjust the vol
ume of the reminder signal by turning the rotary
pushbutton.
Switch off pop-up:
This function is switched off
at the factory. When this function is switched on
�, the messages about the charging status of
the mobile phone in the Audi phone box* on the
infotainment display will not appear. The re
minder not to forget the mobile phone when
leaving the vehicle will also be switched off.
Usage tips
Your MMI displays usage tips when this function
is switched on�. They will appear less often as
time goes by. You can switch the usage tips off at
any time.
Speech dialogue system
Applies to: vehicles with speech dialogue system
Command display:
The MMI displays possible
voice commands in the corresponding menu
when this function is switched on�. You can
switch this function off at any time.
Short dialogue:
When this function is switched
on�, the spoken cues are shortened. You can
switch this function off at any time.
Speech dialogue system volume:
You can adjust
the volume of the spoken cues by turning the ro
tary pushbutton.
Individual speech training
(only possible when
the vehicle is stationary): You can use the individ
ual speech training to adapt the speech dialogue
system to your voice or pronunciation so that the
speech dialogue system can then better recog
nise what you are saying. The individual speech
training prompts you to repeat 20 spoken phra
ses that consist of certain commands and blocks
of digits. If you would like to delete the stored
speech training setup, you can use the function
Reset individual speech training.
Factory settings
You can reset the following functions to the fac
tory settings:
System settings
-
Sound settings
-
Radio
-
Media settings
-Jukebox*
-
Directory*
-
Telephone*
-
Bluetooth and Wi-Fi*
-
Navigation settings*
-
Navigation and online memory*
-
Speech dialogue system*
-
Message settings*
-Apps*
-
Usage tips
-Audi connect*
You can select the desired options individually or
mark
Select all entries.
Select and confirm
Re
store factory settings.
ijj)
Note
- Please note that not only settings will be
deleted when you do this; saved data may
also be erased.
- If you set
Navigation and on line memory*
or
Audi connect*
to the factory settings, the
system will restart after approx. 20 sec
onds. During the restart, the infotainment
display will be black for a few minutes.
- Please note that the speech dialogue sys
tem* is not available as a factory option for
Cabriolet models without a seat belt micro
phone.
Connection manager
Introduction
The connection manager gives you an overview
of your connected devices and their connection
status.
.., Select:
I
MENU
I
button >
Settings>
left control
button>
MMI settings> Connection manager.
.., Select and confirm a menu option.
If a mobile device has already been connected
and you then select and confirm the correspond
ing menu item, the device's name and connection
mode is displayed under this menu item.
...,.
213
