Telephone
- We recommend using the vehicle's Wi-Fi
hotspot when the car phone is in use so that
your mobile phone's apps retain access to
the Internet.
Setting up
Connecting a mobile phone via Bluetooth
Applies to: vehicles with telephone
Fig. 140
PIN display for entry on mobile phone
Important
The vehicle must be stationary, and the ignition
must be switched on.
The Bluetooth function and the discoverability
option of the MMI system
¢page
215
and the
mobile phone must be activated.
The mobile phone you would like to connect must
not be connected actively to any other Bluetooth
device.
The MMI must not be connected to a mobile
phone.
A mini SIM card must not be inserted in the SIM
card reader*.
Connecting a mobile phone
... Select:
I
MENU
I
button
>Telephone> Connect
mobile phone> Continue.
The available Blue
tooth devices will be shown on the infotain
ment display.
Or:
Search for the MMI system
via the Bluetooth device search function on
your mobile phone.
... Select and confirm the desired mobile phone
from the list of Bluetooth devices shown.
ll Not available in all markets. Applies to mobile phones
with Bluetooth remote SIM Access Profile on vehicles with
Audi connect* and Audi phone box*.
142
... The MMI will generate a PIN for the connection
¢Fig. 140.
... Select and confirm
Yes.
... Enter the PIN to establish a connection on your
mobile phone.
Or:
If the PIN is already being
displayed on your mobile phone, confirm it on
the phone and on the M MI. You have about 30
seconds to enter the PIN.
... If you wish to connect your mobile phone via
the remote SIM Access Profile, please also en
ter your SIM card's PIN in the MMI
1
> .
... Please note any additional system queries on
your mobile phone, e.g. whether the phone
should connect automatically in the future. On
some mobile phones, you may also need to
download the directory and allow access to
your messages separately.
After connecting successfully
After the connection has been established suc
cessfully, you will be shown a short message con
taining information on the profiles used to estab
lish the connection. You can also change the pro
files afterwards. Select:
!MENU!
button>
Set
tings>
left control button>
MMI settings> Con
nection manager
¢page
215.
In addition, the contacts on the mobile phone are
automatically loaded into the directory of the
MMI. This may take several minutes, depending
on how many contacts are stored on the mobile
phone.
You can configure your vehicle's mobile Wi-Fi
hotspot
1
> and the Audi connect services*
¢page
159
immediately after connecting an
rSAP-enabled mobile phone.
Or:
Select
!TEL!
but
ton> right control button>
Connection manager
> right control button >
Wi-Fi settings.
CD
CAUTION
Please always observe the information ¢0
in
Wi-Fi hotspot on page 166.
_______
�
