![Audi TT Coupe 2014 Скачать руководство пользователя страница 37](http://html1.mh-extra.com/html/audi/tt-coupe-2014/tt-coupe-2014_owners-manual_3007403037.webp)
0
N
co
....
\D
U'l
N
U'l
....
� Note
- For security reasons we recommend that
you delete the programming of the buttons
prior to selling your vehicle.
- For more information about Homelink,
please see www.homelink.com.
Controls
Applies to vehicles: with garage door opener (Homelink)
Fig. 33
Headliner: Operating unit
Important: The button in the headliner must be
programmed¢
page 35
and the vehicle must
be within range of the garage door or other sys
tem you wish to operate.
.,. To
open the garage door, press the button. The
LED
®
will Light up or flash.
.,. To
close the garage door, press the button
again.
i
Note
When opening/closing the garage door, do
not keep the button pressed for more than
20 seconds; otherwise the garage door open
er will switch to the programming mode.
Doors and windows
Programming the transmitter
Applies to vehicles: with garage door opener (Homelink)
Fig. 34
Distance between radiator grille and hand-held
transmitter
Programming a button: Stage 1 (at the
operating unit)
1. Switch on the ignition.
2. Press and hold down the two outer buttons in
the headliner¢
page 35, Fig. 33
until the
yellow
LED
@
goes out and the green
LED
®
Lights up. This procedure will delete the
standard factory settings and does
not
need
to be repeated when programming the other
buttons.
3. Briefly press the particular button in the
headliner that you would Like to program .
4. Wait until the yellow
LED
@
flashes. The pro
gramming mode is then activated for S mi
nutes.
S. Step in front of your vehicle with the original
hand-held transmitter for the system you
wish to assign to the button in the headliner.
Programming a button: Stage 2 (at the
radiator grille)
6. Hold the hand-held transmitter in front of
your car's radiator grille¢
Fig. 34.
7. Now press and hold the button on the hand
held transmitter until the turn signals on
your vehicle start to flash. This can take up to
30 seconds.
8. If the hazard Lights flash three times, the
button has been programmed successfully. If
the hazard Lights flash once only, the pro
gramming operation has failed or the five mi
nute programming period has expired. Re-
peat the programming procedure starting
Ill-
35
Содержание TT Coupe 2014
Страница 1: ...Owner s Manual Audi TT Coupe Audi Vorsprung durch Technik ...
Страница 2: ......
Страница 8: ...View of cockpit View of cockpit Controls at a glance 6 ...
Страница 284: ...Owner s Manual Audi TT Coupe Englisch 09 2014 152 561 SFV 20 IIIllII 1111111111111111 1525618FV20 www audi com ...