Audi allroad 2001, Руководство пользователя

Страница: 43 / 306

� WARNING
continued
•
Do not cover, obstruct, or
change the steering wheel horn
pad or airbag cover or the instru­
ment panel, particularly in the area
of the passenger side airbag mod­
ule.
•
For cleaning the horn pad or in­
strument panel, use only a soft,
dry cloth or one moistened with
plain water. Solvents or cleaners
could damage the airbag cover. Do
not make any repairs, adjust­
ments, or modifications to any
parts of the airbag system.
•
Do not modify the front bumper
or vehicle body structure.
42
WARNING
continued
•
Never place protective seat cov­
ers or replacement upholstery
over the front and rear seatbacks
that have not been specifically ap­
proved by Audi. Since the side air­
bags deploy out of the side of the
seatback, it would not be able to
deploy and protect properly.
•
Do not use additional seat cush­
ions that cover or interfere with
the areas where the side airbags
inflate.
•
Damage to the original seat cov­
ers or to the seam in the area of the
side airbag module must be re­
paired immediately by an autho­
rized Audi Dealer.
•
The airbag system must be re­
placed by your authorized Audi
Dealer no later than
14
years after
the manufacture date of your ve­
hicle.
�, WARNING
continued
•
The manufacture date can be
found on the Safety Compliance
Sticker located on the left door
jamb as well as on the Vehicle
Identification Label in your
Maintenance booklet. It is abso­
lutely essential to observe this
date in order to assure that the sy­
stem is in good working order.
•
If components of the airbag sys­
tem must be discarded, or ifthe ve­
hicle must be scrapped, certain
safety precautions must be ob­
served. Your authorized Audi
Dealer knows these precautions
and can give you the necessary in­
formation. Failure to follow these
precautions and procedures could
increase the risk of personal in­
jury.