Audi allroad 2001, Руководство пользователя

Страница: 119 / 306

CONTROLS AND
Setting the time
I
date
•
Pull the knob
to set the hour.
The hour
display will flash. Set the desired hour dis­
play by turning the knob clockwise or coun­
terclockwise.
•
To set the minutes,
pull the knob out
as often as needed to make the minutes dis­
play flash. You can then set the minutes dis­
play by turning the knob clockwise or coun­
terclockwise.
•
To set the date,
pull the knob out as
often as needed to make the day, month or
year display flash. You can then set the day,
month or year display by turning the knob
clockwise or counterclockwise.
Your clock will be set once the display stops
flashing after you operate the setting knob.
1 1 8
Changing time zones
If you enter a new time zone, simply change
the hour display to the correct time - see
"Setting the time I date".
Turning the date display on and off
•
Pull out the knob as often as needed to
make the date display flash.
o
Turn the knob counterclockwise to deac­
tivate the display, or clockwise to activate it.
The setting will be accepted as soon as the
display stop flashing after you operate the
setting knob.
3
-
Warning and indicator lights
See page 1 22.
4
-
Engine coolant
-¥-
temperature gauge
The needle in the coolant temperature
gauge will indicate the temperature of the
coolant when the ignition is switched on.
Engine cold
Avoid high engine speeds and heavy
throttle when the needle is still at the left of
the dial.
Normal temperature
During normal running, the needle will re­
main somewhere in the middle of the dial.
If the engine is working hard at high outside
temperatures, the needle may also go fur­
ther to the right,
but this Is no cause for
concern as long as the coolant tem­
perature warning light does not
flash.