Audi allroad 2001, Руководство пользователя

Страница: 273 / 306

DO-IT-YOURSELF
Step
7
Inflating the deflated full size
spare tire
•
Remove the dust cap from the valve
(1 l
by unscrewing it.
•
Take the pressure compressor hose out
of the case, and screw the coupling nut se­
curely onto the valve.
•
Insert the compressor· connector in to
the socket located on the side of the lug­
gage compartment or inset it ino the ciga­
rette lighter socket - see page 1 8 1 .
272
•
Turn on the compressor. The required tire
pressure wil be reached within a few min­
utes. Use
a
pressure gauge to check the tire
pressure. Never operate the compressor
for longer than 5 minutes.
Note
You'll find adhesive labels on the deflated
full size spare tire containing i nstn.1ctions for
using the tire as well as information on the
specified tire pressure.
Step S
•
Unscrew the pressure hose from the val­
ve and screw the dust cap back on.
•
To lower
the vehicle, turn the handle
counter-clockwise until the jack is fully re­
leased. Remove jack.
•
Then go crosswise from one bolt to
another tightening them firmly.
•
If necessary, press the hubcap back onto
the hub of the spare wheel.
Step 9
•
Slip the plastic cover over the wheel con­
taining the flat tire. Then stow this wheel in
the luggage comopartment and secure it so
that it does not shift.
•
Carefully observe the points on
page 288 when using the deflated
full size spare tire.
Notes
•
The hex socket in the screwdriver can be
used to make it easier to handle the wheel
bolts. To do this, pull out the reversible bla-
de.
·
Never use this plastic tool to loosen
or tighten the wheel bolts.
After you change a tire:
•
Deactivating the jack moda - see
page 268.
•
Use a torque wrench to check the
wheel bolt tightening torque as
soon as possible. With alloy wheels
and a deflated full size spare tire, the
torque should be 88.5 ft-lb (120
Nm).