Slide Level Control Pump Temperature Sensor - 3 - into housing - 2 - up to stop.
Install bolt - 1 - and tighten to specified tightening torque --> Air supply unit and solenoid valve block,
assembly overview.
Fig. 507: Identifying Harness Connector And Air Lines
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Connect harness connector - 2 - and clip in electrical wire.
Fig. 508: Identifying Bolt, O-Rings, Housing, And Level Control Pump Temperature Sensor
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Install noise insulation --> 50 - BODY - FRONT .
Install right front wheel housing liner -->
66 - EXTERIOR EQUIPMENT
.
NOTE:
Secure electrical wire only at positions marked - arrows -
.
2008 Audi A6 Quattro
SUSPENSION Suspension, Wheels, Steering
FIXYOURCAR
1:42:01 AM
Page 47
