Remove wheel.
Fig. 471: Identifying Connector, Nuts, And Body Acceleration Sensor
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Disconnect connector - 1 -.
Remove nuts - arrows - and remove body acceleration sensor - 2 -.
Installing
Installation is in reverse order of removal. Note the following:
Fig. 472: Identifying Connector, Nuts, And Body Acceleration Sensor
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Install nuts - arrows - for body acceleration sensor and tighten to 6 Nm.
Connect harness connector - 1 -.
Install wheel and tighten --> 44 - Wheels, Tires, Wheel alignment
Set vehicle on wheels --> Placing vehicle onto lifting platform and onto wheels.
NOTE:
Front body acceleration sensors are installed at top in wheel housing
respectively on left and right sides.
2008 Audi A6 Quattro
SUSPENSION Suspension, Wheels, Steering
FIXYOURCAR
1:42:01 AM
Page 16
