background image

Removing and installing --> Rear Vehicle Level Sensor , removing and installing  

After loosening, adapt control position again --> Control position, adapting again  

Can be checked in "Guided Fault Finding" using VAS 5051 A  

12 - Right Rear Level Control System Sensor G77 

Removing and installing --> Rear Vehicle Level Sensor , removing and installing  

After loosening, adapt control position again --> Control position, adapting again  

Can be checked in "Guided Fault Finding" using VAS 5051 A  

13 - Left front suspension strut (air spring suspension) 

With Left Front Dampening Adjustment Valve N336  

Removing and installing --> Suspension strut (air spring suspension) with mounting bracket, 
removing and installing
  

14 - Left Front Level Control System Sensor G78 

Removing and installing --> Front Vehicle Level Sensor , removing and installing  

After loosening, adapt control position again --> Control position, adapting again  

Can be checked in "Guided Fault Finding" using VAS 5051 A  

15 - Right Front Level Control Sensor G289 

Removing and installing --> Front Vehicle Level Sensor , removing and installing  

After loosening, adapt control position again --> Control position, adapting again  

Can be checked in "Guided Fault Finding" using VAS 5051 A  

16 - Air supply unit with solenoid valve block 

Removing and installing air supply unit --> Air supply unit, removing and installing  

Removing and installing solenoid valve block --> Solenoid valve block, removing and installing  

Front Vehicle Level Sensor , removing and installing 

General Information 

Vehicles with level control system and/or with gas-discharge headlights have an automatic vertical aim control 
system as standard equipment --> 94 - LIGHTS, SWITCHES - EXTERIOR . 

To function properly, the vehicle level control system and automatic vertical aim control system require 
information about compression travel or rebound travel at front and rear axles. 

For this, position of left/right control arm in relation to body is transferred via a coupling rod to Left Front 

 

2008 Audi A6 Quattro 

SUSPENSION Suspension, Wheels, Steering

  

FIXYOURCAR 

  

 1:42:00 AM

Page 10 

 

Содержание 2008 A6 Quattro






















































Отзывы: