AUDAC R2 Скачать руководство пользователя

Страница: 18 / 60

Chapter 4

User interface & configuration

To get access to the control and configuration settings, the R2 should be connected to a

computer or an Ethernet LAN network. For more information about network connections

and settings, see IP basics in chapter 8.

The standard (factory default) IP address of the R2 is 192.168.0.191, make sure this

address is within the IP range of the connected Ethernet LAN network (subnetmask

255.255.255.0). If the default network address is not within range of your LAN network,

contact your network specialist. The network address can be changed with the Standard

Web Based User Interface but therefore a network connection has to be made first!

Any device (PC, Laptop, PDA or even a Smartphone) with a web browser and the

Macromedia Flash 8.0 plug-in (or higher) installed, can be used to control the web based

user interface.

For smart devices, a special application has been developed to control the standard

functions of the R2 Matrix. this application is called the Audac touch.

Open the user interface

Connect the R2 to your network using a straight cable, it is recommended that the port

connected to the Audac R2 is set to a speed of 10/100MB. Ensure that the computer being

used to control the R2 is within the same range and the default IP address for the R2

192.168.0.

Start your default web browser and enter in the address bar the IP address of the embedded

web server of the R2. (The factory default IP address is http://192.168.0.191).

If multiple R2’s are cascaded with each other through the fiber interconnection interface,

first a selection screen will be displayed whereby the R2 should be selected which you want

to control.

Login screen

First the login screen will be displayed.

A password should be entered to get access to the web interface of the R2 amplifier.

There are two different access levels,

administrator

level and

user

level.

If you log-in using the

administrator

password, you get access to all functions and

configuration options of the R2 Amplifier (The factory default password for administrator

access is “R2”).

When you log-in using the

user

password, you only get access to the basic functions of

the R2 Amplifier, such as changing the volume and changing the routing for a particular

output zone. (The factory default password for user access is “user”).

After the right password is entered, click the “OK” button, and you will be redirected to
the main screen of the R2 interface.

NOTE

The passwords can be changed in the Configuration >> Password settings menu (Only administrator)

Содержание R2





























































Результаты поиска

Содержание R2

Отзывы:

Похожие инструкции для R2

Бренды по названию

Популярные бренды

AUDAC R2, Руководство пользователя

Результаты поиска

Содержание R2

Отзывы:

Похожие инструкции для R2

Бренды по названию

Популярные бренды