AUDAC R2, Руководство пользователя

Страница: 13 / 60

13
8 line level in- and outputs are provided in its standard
configuration. Each line input is fitted with stereo RCA input
connectors and a clipping LED which illuminates when the
signal reaches the clipping level. By means of the gain control
potentiometers, the level of the input signals can be controlled.
Each zone output is fitted with RCA stereo connectors for the
connection of external amplifiers. When the optional power
amplifier kit is installed (POW), each output zone has an amplified
stereo with a power of 2 x 60 Watt @ 4 Ohm or 2 x 30 Watt @
8 Ohm. The amplified zone outputs can be bridged by Hardware,
Using the L+ and the R- to obtain a power of 120 Watt @ 8 Ohm
for each output zone.
Audio in- and outputs
Priority & Fiber
Two audio priority inputs and two priority contact inputs provided.
Depending of the configuration, 4 priority signals can be used. The
actions that need to happen when a priority signal occurs can be
freely programmed. There can be automatically switched to the
priority audio inputs when a audio signal is applied, or the internal
routing can be adapted when a signal is available on the contact
inputs.
The link in- and outputs are optical fiber connectors which can be
used for cascading multiple R2’s. For this feature, the optional fiber
interconnection module (OPT2) has to be installed.
Rear