AUDAC AMP203, Руководство пользователя

Страница: 14 / 24

14
Once any changes are made to linking, naming or any other, it is automatically stored
inside the devices itself without requiring any save command. All settings and linkings
will be automatically recalled after power off or re-connection of the devices.
Besides the standard and essential functions described in this document, the Dante
Controller software also includes many additional configuration possibilities that might
be required depending on your application requirements. Consult the complete Dante
controller user guide for more information.
2) AMP203 settings
Once the Dante routing settings are made through the Dante controller, other settings
of the AMP203 itself can be configured using the Audac Touch 2 application, which can
be freely downloaded and operated from various platforms. This is very intuitive to be
operated and automatically discovers all available compatible products in your network.
Available settings include volume, input selection, as well as advanced configurations
such as output power limiters and much more.
NOTE
The maximum input power of the amplifier is factory default configured to 15 Watt
to avoid overload to the PoE equipment. Depending on the network infrastructure
the maximum power drawn can be adjusted here to a maximum of 95 Watt. In case
the available output power/sound pressure levels are insufficient, verify these values
according to the network infrastructure limitations