AUDAC AMP203, Руководство пользователя

Страница: 18 / 24

18
Broadcast Enabled
This enables broadcasting instead of multicasting. (Warning: enabling broadcast
generates extra network traffic on all devices within the same subnet.) This can be
done if your network equipment does not support multicasting.
Settings >> Input
Input gain
The gain for each available input signal can be adjusted individually within a range of
-20 dB and +20 dB.
Set enable inputs
Each input channel can be individually enabled and disabled. Disabling inputs will make
them disappear from the inputs selectable in the Audac Touch™ 2 widgets, and they
also won’t be selectable from any connected wall panel or peripheral.
Settings >> Power
Set power
The maximum input power of amplifier can be configured here (the power which is drawn
from the PoE equipment). It is factory default configured to 15 Watt to avoid overload
to the PoE equipment. Depending on the network infrastructure the maximum power
drawn can be adjusted here to a maximum of 95 Watt. In case the available output power
/ sound pressure levels are insufficient, verify these values according to the network
infrastructure limitations.
Other settings such as loudspeaker impedance settings and bridging enabling / disabling
also has to be configured here.
Settings >> Network
The currently configured network settings are displayed here. In case any spe-
cific network configurations or preferences have to be made (e.g. fixed IP address),
these settings have to be adjusted through the Dante controller software tool.