AUDAC AMP203, Руководство пользователя

Страница: 17 / 24

17
Settings
By clicking the settings button in the top right corner on the devices page the device
settings can be changed. The settings for the AMP203 are divided into the following
categories: Device, Inputs, Power, Network, Authentication.
Settings >> Device
Device/Zone name
The device name can be configured here. The device name can be any kind of
freely selectable name. It is also the name which is visible in the Dante controller.
TouchLink™ zone
A TouchLink™ zone number can be assigned here. Touchlink™ is an unique system
whereby multiple amplifiers within one zone can be linked with each other, so they react
to user as one zone.
TouchLink™ can be used to create virtual zones by linking multiple devices with each
other. A typical application example is a large area where multiple AMP203’s (or other
TouchLink™ compatible devices) are installed in one large open space. When they are
virtually linked, all devices with the same TouchLink™ assigned number will follow each
others’ settings (such as volume, input, muting, ... ).
It means, if they are all installed throughout the same area, they all will be simultaneously
operated by one single control (e.g. volume fader) from the AUDAC Touch™ 2 application.
Additionally, a wall panel which is physically connected to one of the linked devices will
automatically control all the linked devices.
A number shall be assigned as a TouchLink™ zone ID (e.g. 1, 2, 3, ... ) and all devices
with the identical TouchLink™ zone ID will virtually work as one zone.
Address
Here the device’s address can be set. This address is needed to communicate with the
right device if commands will be sent over a serial or UDP connection.
Setup wall panel
This resets the wall panel’s zone settings information, when an optional wall panel is
being used. It is recommended when experiencing any trouble with a wall panel, or when
the wall panel has been used in another type of setup before. It resets the wall panel
settings to zone 1, making sure it can communicate with the AMP203.