AUDAC AMP203, Руководство пользователя

Страница: 13 / 24

13
30W R 30W L
AMP203 connected in stereo mode
60W
AMP203 connected in bridge mode
NOTE
For further information regarding the output powers delivered to various load
impedances, check Chapter 6: Technical specifications from this instruction manual.
Configuring the AMP203
1) Dante controller
Once all connections are made, and the AMP203 is operational, the routing for the Dante
audio transfer can be made.
For configuration of the routing, the Audinate Dante Controller software shall be used. The
use of this tool is extensively described in the Dante controller user guide which can be
downloaded from both audac (www.audac.eu) or Audinate (www.audinate.com) websites.
In this document, we quickly describe the most basic functions to get you started.
Once the Dante controller software is installed and running, it will automatically discover
all the Dante compatible devices in your network. All devices will be shown on a matrix
grid with on the horizontal axis all the devices with their receiving channels shown and
on the vertical axis all the devices with their transmitting channels. The shown channels
can be minimized and maximized by clicking the ‘+’ and ‘-’ icons.
Linking between the transmitting and receiving channels can be done
by simply clicking the cross points on the horizontal and vertical axis.
Once clicked, it only takes a few seconds before the link is made, and
the cross point will be indicated with a green checkbox when successful.
To give custom names to the devices or the channels, double click the device name
whereafter the device view window will pop up. The device name can be assigned in the
‘Device config’ tab, while the transmitting and receiving channel labels can be assigned
under the ‘Receive’ and ‘Transmit’ tabs.