4.2.3 BOTTLE HOLDER
(DEPENDING ON MODEL)
For cleaning baby bottles or vases. To remove, pull
both holders apart in opposite directions
H
.
4.2.4 VARIABLE CUTLERY BASKET
(DEPENDING ON MODEL)
The variable cutlery basket can be separated into
3 parts depending on the amount of cutlery and
the degree of dirtiness.
Small cutlery basket sections also fit into the upper
basket.
To do this, turn the lock on the handle to the right
A
.
Pull the smaller cutlery basket upwards and out of
its holders
B
.
To put the parts together again, proceed in the
opposite direction.
Use the basket inset
C
for your cutlery so that all
items in the basket are surrounded by a sufficient
water flow.
For larger items (e.g. wire whisks) the basket inset
may be removed
C
. Simply raise.
To make loading easier, the cutlery basket can be
removed. Simply take out basket upward.
Place long items such as ladles, cooking spoons
etc. on the shelf in the upper rack.
Ý
Notice :
When finished, test to ensure that the spray arm
can still move freely.
4.2.5 CUTLERY BASKET
(DEPENDING ON MODEL)
A
Use inset.
CAUTION
C
Adjust spoons around differently.
Ý
Notice :
D
Pay attention to any parts that come out of the
basket. The movement of the spray arms must not
be hindered.
H
A
B
C
A
B
C
D
B
Position sharp items so that they are not
likely to damage the door seal and load sharp
knives with the handles up to reduce the risk
of cut-type injuries.
8
