ATX XDS-PRO Series Скачать руководство пользователя страница 43

Страница: 43 / 58

XDS-PRO (PRO1R, PRO4R & PRO1S, PRO4S) Satellite Receivers - User Guide Rev. A R830001-2106

6-3

MONITOR AND CONTROL INTERFACE

ATX

Confidential & Proprietary

time that the network is providing via satellite or Internet. The following table outlines the NTPSERVER command arguments

and actions.

Option

Argument

Action

SHOW
ADD

ON/OFF

Turns NTP Server On or Off

STRATUM

(1 to 5) Value

Specify the stratum accuracy

Table 5: NTP Server Command

PORT Command:

This command is used for displaying port information and specifying port settings. Table 5 outlines

PORT

command’s arguments and their actions.

Option

Argument

Action

SHOW

Displays station mappings for all ports.

STATUS

[port]

Displays Station, Mode, PGM, PID mappings for all ports

STOP

[port]

Stop specified port from playing

LIVE

[port],[pgmid]

Change port to play live program based on program ID.

PID

[port],[pid]

Change port to play PID. PID specified in hex.

PLAY

[port],[recording],[[ofs]]

AMODE

[port],[MONO/STEREO]

Set audio mode on specified port.

AUTOPLAY

[port],[pgmid],RECENT,[n]

AUTOPLAY

[port],[pgmid],TIME,[HH:MM:

SS],[[YYYY-MM-DD]]

INSERT

[port],[isci]

[UN]LOCK

[port] where [port] equals

A,B,C,D or ALL

Lock or unlock specified port or all ports

SYNC

Sync audio ports to regular schedules

[PAUSE/RESUME/

PREVIEW]

[port]

TONE

[100/1000/10000/STOP]

Stops programming and puts tone on all ports

CRASH

[pgm],[LOCK/UNLOCK]

Change to the requested program and optionally lock the port

CRASH

Unlock the requested port and sync to regular schedule

Table 6: PORT Command

PING Command:

This command will attempt to ping the IP address specified by the argument. The syntax is:

PING

[a.b.c.d]

where [a.b.c.d] is the IP to ping, and is a required argument.

QUIT Command:

See

LOGOUT

command.

SF Command:

This command displays the receiver’s fault history, and does so in two distinct ways: by fault code, or by text

description (if the

SHOW

argument is added.) Syntax:

• SF

will provide the fault history in fault codes (see Table 6 for descriptions)

• SF SHOW

will provide the fault history in text form

SN Command:

This command displays the receiver’s serial number.

SMB Command:

This command is used to enable the XDS-PRO receiver so it shares it’s storage via SAMBA to network

computers. The XDSPRO folder will be visible through the network. The following table describes parameters.

Option

Argument

Action

SHARE

ENABLE / DISABLE / SHOW

LSDIR

[Pattern]

List directory structure

MKDIR

Directory Path

Creates all directories in the path

RMDIR

Directory Path

Removes all directories in the path

Table 7: SMB Command

CHAPTER 6:

Содержание XDS-PRO Series



























































Результаты поиска

Содержание XDS-PRO Series

Отзывы:

Бренды по названию

Популярные бренды

ATX XDS-PRO Series, Руководство пользователя

Результаты поиска

Содержание XDS-PRO Series

Отзывы:

Бренды по названию

Популярные бренды