ATX AL-FF-100, Руководство пользователя

Страница: 5 / 13

AL-WS-DR2 and AL-WS-DR2C Operation
Momentary or On/Off Main Switch operation
The main switch of the device can be either On/Off type or Momentary. On/Off has the dimmer on the right, Momentary is
installed with the dimmer on the left. The difference is that each press of the Momentary style causes the light to turn On/Off.
Main switch functions – Momentary style
A momentary switch springs back to On when the lever is pressed down, an On/Off does not spring back (On/Off see below)
When installing a momentary switch type - the slider is on the left and the PCB is upside down.
Function Press How to trigger
On / Off
½ second
Push the switch down for under ½ second. The light will turn on and
off each time you press.
Reset to defaults:
Recalibrate the LED currents
Set switches to On/Off style
60
Press and hold the button for 60 seconds. The switch will enter self
calibration mode the next time the light is turned on. The switch
method will change back to On/Off type. See below.
Restore to Momentary Style
5 times
½ second
Should the light not stay on when the momentary switch is pressed,
the device is in Rocker mode – for example after factory default.
Press the button 5 times with less than 0.5 seconds each to change to
Momentary operation.
Main switch functions – On/Off style
A momentary switch springs back to On when the lever is pressed down, an On/Off switch does not spring back When
installing a On/Off switch type, the Slider is on the right.
Function Press How to trigger
Exit Momentary Style
Turn ON
Wait 60
seconds
Turn OFF
Should the not act like a simple On/Off switch, then it might be in
Momentary style. A Factory reset will fix this.
Factory reset – press switch top in, wait 60 seconds, turn switch off.
The device will return to On/Off style and will recalibrate.
Reset to defaults:
waiting to calibrate
switches are On/Off type
8
Set the dim to low dim. Turn the switch on for 2 seconds. Now off
and on 8 times, quickly, leaving it on after the last flip. The brightness
will change to 50%, then go off
The switch will enter self calibration mode and the lights will flash.