31
3 Menu Functions and Settings
INST LEVEL (Adjusting the volume of each pad)
In this screen you can adjust the volume level of each pad for the selected drum kit .
1
Strike the pad that you want to adjust the volume level
for.
2
Use the value knob to adjust the volume level for the
selected (highlighted) pad.
3
Repeat steps 1 and 2 to make further pad volume level adjustments.
*The pad volume levels for each drum kit are stored automatically .
SETUP
SYSTEM
Help Screen Display
Target Pad Display for
'Pad Pan' setting
Utility Tab
Trigger Tab
System Tab
1
Press the [2] (SYSTEM) button to select the System tab menu.
2
Use the value knob to select a menu item and press the [ENTER] button.
LCD Contrast
This setting adjusts the contrast of the display .
LCD Brightness
This setting adjusts the brightness of the display .
Auto Power
Off
The xD3 drum module automatically turns off after a 30-minute period of inactivity to
reduce power consumption .
The auto power-off function has three available settings:
30 mins :
The power turns off after 30 minutes .
4 hours :
The power turns off after 4 hours .
DISABLE :
The unit will not power-off automatically .
Master Vol Limit
This sets the master output volume level that is controlled by the [+] and [-] buttons .
This setting is used to limit the maximum output volume of the xD3 in order to prevent
hearing damage caused by listening at excessive volume levels .
MIDI Channel
Sets the MIDI channel number for sending and receiving MIDI data . Default setting is 10 .
Pad Pan
This setting adjusts the stereo panning position of each pad .
1 . Strike the pad that you want to adjust . The top right corner of the screen indicates
which pad is selected .
2 . Turn the value knob to adjust the panning position while striking the pad . The range of
values that may be entered is, Left (L1 - 10), CENTER, and Right (1R - 10R) .
3 . Repeat Steps 1 and 2 for all the pads .
Note that stereo panning positions are general settings that apply to all drum kits .
Firmware
Firmware version
Product ID
Product ID . A product ID is required when purchasing drum kits from the sound store .
3
Use the value knob to adjust the value/setting and press the [ENTER] button to
confirm
.
