ATTO Technology iPBridge 1550, Инструкция по установке и эксплуатации

Страница: 29 / 72

20
Installation: configuration
5 On the menu presented, go to the Microsoft
VM, Java permissions and make sure
Disable Java is not selected.
6 Go to the Miscellaneous topic and select
METAREFRESH
Set up a VLAN: Virtual Local Area Network
A Virtual LAN (VLAN) is a group of devices on
the same physical LAN which can communicate
with each other as if they were all on different
physical LANs. This creates a network that is
independent of physical location, allows grouping
of users into logical workgroups, increases
efficient use of resources, and adds security
options by allowing some users into the LAN and
keeping other users out.
You may create up to eight Virtual LAN IDs for
each Ethernet data port. Each VLAN ID is
assigned a VLAN name of up to 64 characters. If
no VLAN ID exists for a data port, VLAN is
disabled for that port.
1 If you have not already, open an ExpressNAV
session. For instructions, refer to
Opening an
ExpressNAV session
on page 29
2 Click on the Ethernet Port Configuration
page.
3 Click on the data port you wish to configure.
4 Add a VLAN ID number and name in the
appropriate boxes.
5 Press Submit.
After rebooting, Virtual LAN takes effect.
For details on the commands used to set up a
VLAN refer to
Ethernet commands on page 49.